What is Rejuva® Facade Coating?
Rejuva® Facade Coatings have been designed to improve the performance of facades with the latest coating technology. Rejuva has super-hydrophobic capabilities due to its water repellency and provides a very long life span. Your exterior will be protected against moisture ingress and humidity, especially in coastal areas. Its ultimate beading effect offers self-cleaning efficiency, while dust particles just flow off with the rain. Rejuva® technology allows facades to breathe, improving the thermal efficiency of the property.
The excellent hydrophobic properties will make your facade dry and extremely resistant to biological hazards, mould, mildew,etc.
Self cleaning efficiency
Dirt particles are unable to obtain a hold on a facade coated with Rejuva and will simply flow off with rainfall.
Your facade will remain clean and attractive for many years
The facade is able to breathe and will be permeable to water vapour.
You will recognise the excellent water repellent properties by its beading behavior. It will make the masonry dry and extremely resistant to biological hazards, mould, mildew,etc. A dry masonry will improve the thermal resistance, prevent frost damage and reduce the growth of microbial spores.
The masonry is able to breathe and will be permeable to water vapour. Air and moisture pass through from one side to the other. A breathing masonry will improve the thermal conductivity and insulation properties. A 5% content of damp in cavity wall insulation or other building materials can lower the thermal resistance by up to 50%.
Dirt particles are unable to obtain a hold on the Rejuva ® coated facade and will simply flow off with rainfall. The façade remains clean and attractive, even on sides which are particularly exposed to the weather like on the north-facing side or facades in shade, as well as in areas with high air humidity or sea salt penetrated air.
How to apply Rejuva Facade Coating
After suitable surface preparation the masonry should be treated with Rejuva cleaner. When the masonry is dry and clean apply 2 full coats of Rejuva facade coating with a roller or airless spray .
Silane resin technology coatings have been available for over 25 years and are actually the fastest growing exterior coating systems in Europe. All this expertise has been combined with the latest technology.
Do you have problems with porous surfaces?
Rejuva® Facade Primer
Is a special water based primer for use on absorbent and difficult to adhere to surfaces. It will significantly improve the adhesion of the topcoat when used on mortar, clay tiles and other difficult to adhere to surfaces. The primer has the same breathability rating as the topcoat.