Wood Impregnator
Rejuva® Wood Impregnator is a water-based solution designed with the latest nanotechnology. It protects wooden surfaces such as hardwood terraces, beams or wooden boards against premature ageing. Thanks to its extreme beading effect, it effectively prevents the shrinkage or splitting of wood.As the surface remains constantly dry, microorganisms can not adhere and green growth is drastically minimized.
BREATHABILITY
The wood is able to breathe and will be permeable to water vapour.
DURABILITY
Wood and timber will remain clean and attractive for many years.
SELF CLEANING EFFICIENCY
Dirt particles are unable to obtain a hold on wood coated with Rejuva and will simply flow off with rainfall.
SUPER HYDROPHOBIC
The excellent hydrophobic properties will make your wood dry and extremely resistant to biological hazards, mould, mildew,etc.
Properties and Advantages
- Based on the latest nanotechnology.
- Scientifically tested for the protection of wood surfaces.
- Minimizes the adhesion of stains.
- Especially developed for hardwood terraces, beams, etc.
- Extremely water-repellent.
- Does not discolor.
- Reduces the growth of microorganisms
- Clear treatment only.
- Apply only on clean untreated wood or stained wood where the grain can be seen.
- Cannot be used on opaque wood finishes.
How to apply Rejuva® Wood Impregnator
Rejuva Wood Treatment is really simple to apply with almost immediate results. The steps to follow are simple.
1
The surface must be clean before application, make sure that the surface is clean and dry before carrying out the process.
2
Spray the surface with a low pressure pump, or use a brush or roller.
3
Allow at least one hour to dry. As a reference, 1 hour at 20ºC and 60% humidity.